BCF30100 Certificate III in Off-Site Construction (Shopfitting)

Employees in the trade of Shopfitting assemble and install shopfronts, showcases, counters, workstations and other internal fitments in a shop or commercial building.

Applicants for trade recognition should provide evidence to demonstrate at least 4 years practical experience in the following trade competencies.

In addition to any other evidence supporting an application for trade recognition, applicants are encouraged to use this checklist as a self assessment competency guide and lodge it with the application.

Core		Check
BCG1000A	Carry out interactive workplace communication
BCG1000A	Carry out OH&S requirements
BCG1002A	Plan and organise work
BCG1003A	Read and interpret plans
BCG1004A	Carry out measurements and calculations
BCG1005A	Use hand and power tools
BCG1006A	Use small plant and equipment
BCG1008A	Use simple levelling devices
BCG1011A	Handle construction materials & safely dispose of waste
BCG2000A	Assemble simple partition frames
BCG2001A	Prepare surfaces
BCG2004A	Carry out levelling
BCG2010A	Remove/replace door and window furniture
BCG2012A	Make set outs
MEM2.5C11	Measure with graduated devices
BCF2010A	Maintain inventory and control stock
BCF2012A	Package manufactured products for transport
BCF2013A	Assemble components
BCF2014A	Manually cut glass to simple shapes
BCF2015A	Use aluminium sections for fabrication
BCF2018A	Apply and install sealant and sealant devices
BCF2016A	Prepare for off-site manufacturing process
BCF2001A	Use static machines
BCF3000A	Maintain static machinery
BCF3001A	Set up static machinery
BCF3012A	Setting out cabinets, showcases, wall units, counters and work stations
BCF3013A	Assemble cabinets, showcases, wall units, counters and work stations
BCF3016A	Set out shopfronts, commercial entries, bulkheads and component fittings
BCF3017A	Fabricate shopfronts, commercial entries, bulkheads, including component fittings
BCF3018A	Assemble/install shopfront, commercial entries, bulkheads and components
BCF3023A	Apply finishes
BCF3036A	Shift materials manually
BCF3037A	Set out and level
BCF3038A	Apply and trim decorative finishes
BCF3041A	Cut and install glass
BCF3042A	Mark off/out
Electives
BCG1007A	Erect and dismantle restricted height scaffolding
BCG1010A	Carry out concreting to simple forms
BCG1016A	Prepare for construction process (carpentry)
BCG1019A	Prepare for construction process (painting & decorating)
BCG2002A	Oxy/LPG acetylene cutting
BCG2007A	Operate elevated work platforms
BCG2008A	Use explosive power tools
BCF2009A	Carry out load slinging of off-site materials
BCF2011A	Use computers
BCG3012A	Construct and erect timber wall framing
BCG3016A	Install sub floor framing
BCG3045A	Apply paint by spray
MEM5.15AA	Weld using manual metal arch welding process (MMAW)
BCG3071A	Assemble fabricated components
BCG3084A	Install framed ceiling (sheet and boards)
BCG3096A	Apply paint by brush/roller
BCG3104A	Install curtain walling
BCF3002A	Use computer controlled machinery
BCF3003A	Identify stair construction and the factors governing stair design
BCF3004A	Set out stairs
BCF3005A	Manufacture stair components - straight flighted stairs
BCF3006A	Assemble and install stairs
BCF3008A	Identify window and door construction
BCF3009A	Setting out of windows and doors
BCF3010A	Manufacture components for door and window frames, doors and sashes
BCF3011A	Assemble (door/windows)
BCF3014A	Prepare aluminium for assembly
BCF3015A	Assemble aluminium framework
BCF3024A	Install internal lining
BCF3049A	Manufacture aluminium grills and louvres
To achieve Certificate III in Off-Site Construction (Shopfitting), all core standards and 8 electives shall be chosen, with a maximum of 1 from the 1000 series and a maximum of 2 from the 2000 series.