DET - Certificate III in Drafting Trades (Course 91084NSW)

Certificate III in Drafting Trades (Course 91084NSW)

Applicants for trade recognition should provide evidence to demonstrate at least 4 years practical experience in the following trade competencies.

In addition to any other evidence supporting an application for trade recognition, applicants are encouraged to use this checklist as a self assessment competency guide and lodge it with the application.

This qualification was developed and accredited by TAFE NSW.

Rationale:

In order to receive the qualification, learners must complete the following: From Group 1: Modules to a total of 360 hours from any one subgroup From Group 2: Modules to a total of 72 hours from any one subgroup From Group 3: Modules to a total of 288 hours; Elective modules to a total of 144 hours must also be completed. These modules may be chosen from any of the subgroups in Group 1 and/or Group 2 and/or Group 3, providing any specified completion limits are observed.

The total course duration is 864 hours.
The modules in Group 888 do not contribute to course completion. They are
available for tutorial support.

Course Structure

Group 1	Compulsory Drafting Modules
	Subgroup 1 Drafting Trade Mechanical
	Subgroup 2 Drafting Trade Electrical
Group 2	Compulsory Communication/Base Level and Workshop Modules
	Subgroup 1 Communication and Base Modules
	Subgroup 2 Workshop Modules
Group 3	Drafting Trade Elective Modules

Group 1 Compulsory Drafting Modules

1 subgroup must be completed

Subgroup 1 Drafting Trade Mechanical

At least 360 hours of modules must be completed

NSW Module No	Module Name	Check
7757H	CAD B – Applications
7758Q	Drafting Reinforced Concrete
7758S	Drafting Steelwork (Shop Drawings)
7759M	Engineering Drawing (Structural & Mechanical
7766AA	CAD 3D – Wireframe
7771A	Drafting – Orthogonal Concepts
7771AL	Drafting – Industrial Steelwork
7771AM	Drafting – Reinforced Concrete Structure
7771B	Drafting – Advanced Orthogonal Concepts
7771F	CAD Operations
7771Q	Drafting – Locating & Fastening Devices
7771R	Drafting – Bearings and Seals
7771S	Drafting – Mechanical Drive Systems
7771T	Drafting – General & Geometry Tolerancing
8264U	CAD A – Tools

Subgroup 2 Drafting Trade Electrical

At least 360 hours of modules must be completed

NSW Module No	Module Name	Check
4269H	Computer Electronic Drafting
6077W	Drawing & Diagrams for Electrical Work
7757H	CAD B – Applications
7757L	Computer Aided Drafting Systems
7771A	Drafting – Orthogonal Concepts
7771AF	Drafting – Electrical Diagrams
7771AG	Drafting – Electrical Building Services
7771AH	Drafting – Electronic Systems
7771B	Drafting – Advanced Orthogonal Concepts
7771F	CAD Operations
8264U	CAD A – Tools
8272F	Electrical Drawing Interpretation & Conn
8273E	Interpretation of Instruments Drawings & Manuals

Group 2 Compulsory Communication/Base Level and Workshop Modules All subgroups must be completed Subgroup 1 Communication and Base Modules

At least 36 and no more than 108 hours of modules must be completed

NSW Module No	Module Name	Check
4247B	Metal and Engineering Foundations
7771E	Drafting – Industrial Appreciation
7793T	Occupation Health and Safety
8264D	Computing in Engineering
8264E	Quality Concepts
8979A	Presenting Information
8979H	Negotiation Skills
8979P	Presenting Reports

Subgroup 2 Workshop Modules

At least 36 and no more than 108 hours of modules must be completed

NSW Module No	Module Name	Check
4204A	Refrigeration Fundamentals
7734P	Measurement-Introduction
7768B	Introduction to Air-Conditioning
7786AL	Hand Tools
7786AM	Power Tools
7786AU	Machining
7793AA	Basic Electrical/Electronic
7793J	Workshop Practices
7793Z	Introduction to Electricity and Electronic
8264J	Welding and Thermal Cutting

Group 3 Drafting Trade Elective Modules

At least 288 hours of modules must be completed

NSW Module No	Module Name	Check
4247AM	CAD – 3D Add on Package – Mechanical
4247AN	CAD – 2D Add on package – Structural
4247AP	CAD – 3D Add on package – Residential
4247AR	CAD – 2D Add on Package – Concrete
4247AS	CAD – 3D Add on Package – Structural
4247AT	Drafting – Basic House Construction
4247AU	Drafting – Two Storey Residential
4247AV	Specification Writing & Quantity Estimating
4247BC	CAD – 2D Add on Package – Mechanical
4247R	Drafting – Tool Drafting Introduction
4247S	Drafting – Tool Drafting Jigs & Fixtures
4247T	Drafting – Tool Drafting Press Tools
4247U	Drafting – Tool Drafting Moulds
7757B	Engineering Computing
7757C	Engineering Design Concepts
7757D	Engineering Graphics
7757F	Computers and their Application to CAD
7757J	CAD C – Customising
7757K	CAD D – Interfacing
7758C	Engineering Drawing (Detail)
7759L	Engineering Drawing (Development & Pipework)
7759P	Calculus
7759Q	Engineering Maths A
7759R	Engineering Maths B
7771AA	Drafting – Single Storey Residential
7771AB	Drafting – Survey Cartography
7771AC	Drafting – Engineering Survey
7771AD	Drafting – A/C Ducting Systems
7771AE	Drafting – A/C Plantroom Systems
7771AK	Drafting – Integrated Project
7771AP	Drafting – Fire Protection Services
7771AQ	Drafting – Conveyor Systems
7771AR	Drafting – Lifts and Elevators
7771C	Drafting – Geometric & Isometric Concepts
7771H	CAD – 3D Modelling
7771J	CAD – Digitising and Scanning
7771K	Drafting – Descriptive Geometry
7771U	Drafting – Fabricated Components
7771V	Drafting – Development Practices
7771W	Drafting – Duct and Hopper
7771X	Drafting – Industrial Piping Systems
7771Y	Drafting – Piping Shop Details
7771Z	Drafting – Residential Outbuildings
7786AN	Engineering Drawing Interpretation 1
7786AP	Produce and Interpret Engineering Sketches
7786AQ	Engineering Calculations 1
7786AV	Engineering Calculations 2

These are tutorial modules and do not count towards completion of a qualification

Group 888 Tutorial Support

NSW Module No	Module Name	Check
4208C	Manufacturing & Engineering Technical Tutorial Support
8999A	Tutorial Support