|
Commissioners Information Bulletin 188
Issued: 20 May 2002 - Attachment C
Certificate II in Plastics PMB 2 01 01
To be awarded a Certificate II in Plastics, competency must be achieved in a total of 14 units of competency comprised of:
- all 5 core competencies
- at least 3 production competencies from the ‘200’ series (this may include up to 2 from the ‘300’ series)
- other competencies relevant to the learner’s workplace. These may be production or support competencies from this Training Package, and up to 3 competencies from another endorsed Training Package.
The production competencies chosen for this certificate cannot be counted towards the achievement of a second qualification at this certificate level under this Training Package. A different set of production competencies must be chosen for this purpose.
If you already hold a certificate I under this Training Package, you require an additional 7 competencies to qualify for a certificate II. The selection of competencies must comply with the above rules.
NOTES
- Competencies shown in italics in the tables below are also part of Certificate I.
- Competencies marked * have prerequisites. See individual unit for details.
- Requirements for a streamed Certificate II are listed separately.
- The customisation rules may also need to be consulted.
Core competencies
| ANTA Code |
Unit Title |
| PMB HAN 103 B |
Shift materials safely by hand |
| PMB OHS 101 B |
Follow OH&S policies and procedures |
| PMB QUAL 101 A |
Apply quality processes |
| PMB WKOPS 101 B |
Apply work procedures and practices |
| PMB COMM 102 B |
Complete workplace documents |
Production competencies
| ANTA Code |
Unit Title |
| PMB FIN 201 B |
Finish products and components |
| PMB FIN 202 B |
Fit attachments to products |
| PMB FIN 203 B |
Repair product imperfections |
| PMB FIN 205 B |
Hand decorate products |
| PMB MAINT 202 B |
Undertake basic maintenance |
| PMB PREP 201 A |
Prepare moulds for composites production |
| PMB PREP 205 B |
Assemble materials and equipment for production |
| PMB PREP 206 B |
Prepare materials to formulae |
| PMB PROD 200 A |
Operate equipment |
| PMB PROD 206 A |
Operate ancillary equipment |
| PMB PROD 207 A |
Operate calender |
| PMB PROD 209 B |
Operate cable winding equipment |
| PMB PROD 210 A |
Operate injection moulding equipment |
| PMB PROD 211 A |
Operate blow moulding equipment |
| PMB PROD 212 A |
Operate thermoforming equipment |
| PMB PROD 213 A |
Operate extruders |
| PMB PROD 216 A |
Operate blown film equipment |
| PMB PROD 217 A |
Operate printing equipment |
| PMB PROD 221 A |
Operate rotational moulding equipment |
| PMB PROD 229 A |
Operate polystyrene shape moulding equipment |
| PMB PROD 230 B |
Monitor process operations |
| PMB PROD 233 A |
Operate film conversion equipment |
| PMB PROD 235 B |
Use materials and process knowledge to complete work operations |
| PMB PROD 236 B |
Operate hand held air/power equipment for production processes |
| PMB PROD 237 B |
Splice cables |
| PMB PROD 240 B |
Cut materials |
| PMB PROD 245 B |
Fabricate materials |
| PMB PROD 246 B |
Hand mix materials |
| PMB PROD 247 B |
Hand lay up composites |
| PMB PROD 248 B |
Prepare surfaces for coating |
| PMB PROD 249 A |
Apply liquid surface coatings |
| PMB PROD 251 A |
Apply gel coat or other polymer surface finish |
| PMB PROD 252 B |
Operate compounding equipment |
| PMB PROD 253 B |
Operate an internal mill blender |
| PMB PROD 254 B |
Operate an open mill blender |
| PMB PROD 255 B |
Operate mixing equipment |
| PMB PROD 259 B |
Operate granulating equipment |
| PMB PROD 264 B |
Check recycle wash process |
| PMB PROD 270 A |
Operate injection blow moulding equipment |
| PMB PROD 280 A |
Operate resin-glass depositor |
| PMB PROD 281 A |
Finish composite products |
| PMB PROD 282 A |
Assemble mould |
| PMB PROD 283 A |
Demould product |
| PMB PROD 284 A |
Operate open flame moulding equipment |
| PMB PROD 287 A |
Weld plastic materials |
| PMB PROD 290 A |
Operate filament winding equipment |
| PMB PROD 291 A |
Operate resin infusion equipment |
| PMB PROD 292 A |
Operate pultrusion equipment |
| PMB PROD 293 A |
Operate vacuum bagging equipment |
| PMB PROD 294 A |
Operate resin transfer moulding equipment |
| PMB PROD 295 A |
Operate composite sheeting equipment |
| PMB PROD 296 A |
Operate centrifugal casting equipment |
| PMB PROD 297 A |
Operate equipment using moulding compounds |
| PMB PROD 298 A |
Operate equipment pre-pregs |
Support competencies
| ANTA Code |
Unit Title |
|
| OH&S |
| PMB MAINT 101 B |
Conduct housekeeping activities |
|
| PMB OHS 204 B |
Apply emergency/incident procedures |
|
| PMB OHS 207 B |
Implement & monitor OH&S policies and procedures |
|
| PMA PER 200 A |
Work in accordance with an issued permit |
|
| PMC SUP 272 A |
Identify and act upon hazards in the workplace |
|
| Interpersonal |
| LMT PR GN 15 A |
Coordinate work of team/section |
|
| PMB TRAIN 201 A |
Assist in the provision of on the job training |
|
| PMB WKOPS 106 B |
Work with others in a team |
|
| Quality |
| PMB CALC 101 A |
Make measurements |
|
| PMB COMP 201 B |
Use computers in the workplace |
|
| PMB QUAL 290 A |
Monitor and maintain product quality |
|
| PMB QUAL 291 A |
Participate in continuous improvement |
|
| PMC SUP 292 A |
Sample and test materials and product |
|
| Environmental |
| PMA ENV 100 A |
Identify and minimise environmental hazards |
|
| PMA ENV 200 A |
Respond to environmental hazards |
* |
| PMB WASTE 101 B |
Collect waste for recycling or safe disposal |
|
| Handle goods |
| PMB HAN 201 B |
Process orders and despatch products |
|
| PMB HAN 202 B |
Load and unload goods |
|
| PMB HAN 204 B |
Package goods/materials |
|
| PMB HAN 205 B |
Transfer loads with slings |
|
| PMB HAN 208 B |
Store products |
|
| PMB ORG 205 B |
Receive goods |
|
| TDT1097A |
Operate a forklift |
|
Certificate II in Rubber PMB 2 02 01
To be awarded a Certificate II in Rubber, competency must be achieved in a total of 14 units of competency comprised of:
- all 5 core competencies
- at least 3 production competencies from the ‘200’ (this may include up to 2 from the ‘300’ series)
- other competencies relevant to the learner’s workplace. These may be production or support competencies from this Training Package, and up to 3 competencies from another endorsed Training Package.
The production competencies chosen for this certificate cannot be counted towards the achievement of a second qualification at this certificate level under this Training Package. A different set of production competencies must be chosen for this purpose.
If you already hold a certificate I under this Training Package, you require an additional 7 competencies to qualify for a certificate II. The selection of competencies must comply with the above rules.
NOTES
- Competencies shown in italics in the tables below are also part of Certificate I.
- Competencies marked * have prerequisites. See individual unit for details.
- Requirements for a streamed Certificate II are listed separately.
- The customisation rules may also need to be consulted.
Core competencies
| ANTA Code |
Unit Title |
| PMB HAN 103 B |
Shift materials safely by hand |
| PMB OHS 101 B |
Follow OH&S policies and procedures |
| PMB QUAL 101 A |
Apply quality processes |
| PMB WKOPS 101 B |
Apply work procedures and practices |
| PMB COMM 102 B |
Complete workplace documents |
Production competencies
| ANTA Code |
Unit Title |
| PMB FIN 201 B |
Finish products and components |
| PMB FIN 202 B |
Fit attachments to products |
| PMB FIN 203 B |
Repair product imperfections |
| PMB FIN 205 B |
Hand decorate products |
| PMB MAINT 202 B |
Undertake basic maintenance |
| PMB PREP 205 B |
Assemble materials and equipment for production |
| PMB PREP 206 B |
Prepare materials to formulae |
| PMB PROD 200 A |
Operate equipment |
| PMB PROD 206 A |
Operate ancillary equipment |
| PMB PROD 207 A |
Operate calender |
| PMB PROD 209 B |
Operate cable winding equipment |
| PMB PROD 210 A |
Operate injection moulding equipment |
| PMB PROD 213 A |
Operate extruders |
| PMB PROD 217 A |
Operate printing equipment |
| PMB PROD 229 A |
Operate polystyrene shape moulding equipment |
| PMB PROD 230 B |
Monitor process operations |
| PMB PROD 235 B |
Use materials and process knowledge to complete work operations |
| PMB PROD 236 B |
Operate hand held air/power equipment for production processes |
| PMB PROD 240 B |
Cut materials |
| PMB PROD 241 A |
Lay up rubber lining |
| PMB PROD 245 B |
Fabricate materials |
| PMB PROD 246 B |
Hand mix materials |
| PMB PROD 248 B |
Prepare surfaces for coating |
| PMB PROD 249 A |
Apply liquid surface coatings |
| PMB PROD 252 B |
Operate compounding equipment |
| PMB PROD 253 B |
Operate an internal mill blender |
| PMB PROD 254 B |
Operate an open mill blender |
| PMB PROD 255 B |
Operate mixing equipment |
| PMB PROD 259 B |
Operate granulating equipment |
| PMB PROD 261 A |
Operate continuous vulcanising equipment |
| PMB PROD 262 A |
Operate tyre curing equipment |
| PMB PROD 263 A |
Operate retread curing equipment |
| PMB PROD 264 B |
Check recycle wash process |
| PMB PROD 265 A |
Operate portable vulcanising equipment |
| PMB PROD 266 A |
Prepare tyre casings for retreading |
| PMB PROD 267 A |
Operate steel cutting equipment |
| PMB PROD 268 A |
Operate bead coiling equipment |
| PMB PROD 282 A |
Assemble mould |
| PMB PROD 283 A |
Demould product |
| PMB PROD 287 A |
Weld plastic materials |
Support competencies
| ANTA Code |
Unit Title |
|
| OH&S |
| PMB MAINT 101 B |
Conduct housekeeping activities |
|
| PMB OHS 204 B |
Apply emergency/incident procedures |
|
| PMB OHS 207 B |
Implement & monitor OH&S policies and procedures |
|
| PMA PER 200 A |
Work in accordance with an issued permit |
|
| PMC SUP 272 A |
Identify and act upon hazards in the workplace |
|
| Interpersonal |
| LMT PR GN 15 A |
Coordinate work of team/section |
|
| PMB TRAIN 201 A |
Assist in the provision of on the job training |
|
| PMB WKOPS 106 B |
Work with others in a team |
|
| Quality |
| PMB CALC 101 A |
Make measurements |
|
| PMB COMP 201 B |
Use computers in the workplace |
|
| PMB QUAL 290 A |
Monitor and maintain product quality |
|
| PMB QUAL 291 A |
Participate in continuous improvement |
|
| PMC SUP 292 A |
Sample and test materials and product |
|
| Environmental |
| PMA ENV 100 A |
Identify and minimise environmental hazards |
|
| PMA ENV 200 A |
Respond to environmental hazards |
* |
| PMB WASTE 101 B |
Collect waste for recycling or safe disposal |
|
| Handle goods |
| PMB HAN 201 B |
Process orders and despatch products |
|
| PMB HAN 202 B |
Load and unload goods |
|
| PMB HAN 204 B |
Package goods/materials |
|
| PMB HAN 205 B |
Transfer loads with slings |
|
| PMB HAN 208 B |
Store products |
|
| PMB ORG 205 B |
Receive goods |
|
| TDT1097A |
Operate a forklift |
|
Certificate II in Cablemaking PMB 2 03 01
To be awarded a Certificate II in Cablemaking, competency must be achieved in a total of 14 units of competency comprised of:
- all 5 core competencies
- at least 3 production competencies at the ‘200’series, (this may include up to 2 from the ‘300’ series) including at least one of
| PMB PROD 209 B |
Operate cable winding equipment |
| PMB PROD 213 A |
Operate extruders |
| PMB PROD 237 A |
Splice cables |
- other competencies relevant to the learner’s workplace. These may be production or support competencies from this Training Package, and up to 3 competencies from another endorsed Training Package.
The production competencies chosen for this certificate cannot be counted towards the achievement of a second qualification at this certificate level under this Training Package. A different set of production competencies must be chosen for this purpose.
If you already hold a certificate I under this Training Package, you require an additional 7 competencies to qualify for a certificate II. The selection of competencies must comply with the above rules.
NOTES
- Competencies shown in italics in the tables below are also part of Certificate I.
- Competencies marked * have prerequisites. See individual unit for details.
- The customisation rules may also need to be consulted.
Core competencies
| ANTA Code |
Unit Title |
| PMB HAN 103 B |
Shift materials safely by hand |
| PMB OHS 101 B |
Follow OH&S policies and procedures |
| PMB QUAL 101 A |
Apply quality processes |
| PMB WKOPS 101 B |
Apply work procedures and practices |
| PMB COMM 102 B |
Complete workplace documents |
Production competencies
| ANTA Code |
Unit Title |
| PMB FIN 201 B |
Finish products and components |
| PMB FIN 203 B |
Repair product imperfections |
| PMB MAINT 202 B |
Undertake basic maintenance |
| PMB PREP 205 B |
Assemble materials and equipment for production |
| PMB PREP 206 B |
Prepare materials to formulae |
| PMB PROD 200 A |
Operate equipment |
| PMB PROD 206 A |
Operate ancillary equipment |
| PMB PROD 207 A |
Operate calender |
| PMB PROD 209 B |
Operate cable winding equipment |
| PMB PROD 213 A |
Operate extruders |
| PMB PROD 217 A |
Operate printing equipment |
| PMB PROD 230 B |
Monitor process operations |
| PMB PROD 235 B |
Use materials and process knowledge to complete work operations |
| PMB PROD 236 B |
Operate hand held air/power equipment for production processes |
| PMB PROD 237 B |
Splice cables |
| PMB PROD 246 B |
Hand mix materials |
| PMB PROD 252 B |
Operate compounding equipment |
| PMB PROD 253 B |
Operate an internal mill blender |
| PMB PROD 254 B |
Operate an open mill blender |
| PMB PROD 255 B |
Operate mixing equipment |
| PMB PROD 259 B |
Operate granulating equipment |
| PMB PROD 261 A |
Operate continuous vulcanising equipment |
| PMB PROD 264 B |
Check recycle wash process |
| PMB PROD 265 A |
Operate portable vulcanising equipment |
| PMB PROD 287 A |
Weld plastic materials |
Support competencies
| ANTA Code |
Unit Title |
|
| OH&S |
| PMB MAINT 101 B |
Conduct housekeeping activities |
|
| PMB OHS 204 B |
Apply emergency/incident procedures |
|
| PMB OHS 207 B |
Implement & monitor OH&S policies and procedures |
|
| PMA PER 200 A |
Work in accordance with an issued permit |
|
| PMC SUP 272 A |
Identify and act upon hazards in the workplace |
|
| Interpersonal |
| LMT PR GN 15 A |
Coordinate work of team/section |
|
| PMB TRAIN 201 A |
Assist in the provision of on the job training |
|
| PMB WKOPS 106 B |
Work with others in a team |
|
| Quality |
| PMB CALC 101 A |
Make measurements |
|
| PMB COMP 201 B |
Use computers in the workplace |
|
| PMB QUAL 290 A |
Monitor and maintain product quality |
|
| PMB QUAL 291 A |
Participate in continuous improvement |
|
| PMC SUP 292 A |
Sample and test materials and product |
|
| Environmental |
| PMA ENV 100 A |
Identify and minimise environmental hazards |
|
| PMA ENV 200 A |
Respond to environmental hazards |
* |
| PMB WASTE 101 B |
Collect waste for recycling or safe disposal |
|
| Handle goods |
| PMB HAN 201 B |
Process orders and despatch products |
|
| PMB HAN 202 B |
Load and unload goods |
|
| PMB HAN 204 B |
Package goods/materials |
|
| PMB HAN 205 B |
Transfer loads with slings |
|
| PMB HAN 208 B |
Store products |
|
| PMB ORG 205 B |
Receive goods |
|
| TDT1097A |
Operate a forklift |
|
Certificate II in Process Manufacturing PMB 2 04 01
The Process Manufacturing Certificate II is for:
- production support workers (people working in the industry and filling the vital production support roles, but who may not have the opportunity to develop competence in the units of competency related directly to producing products)
- those employees who operate across more than one category within the plastics, rubber and cablemaking industry or ‘specialised processes’ and elsewhere where required
To be awarded a Certificate II in Process Manufacturing, competency must be achieved in a total of 14 units of competency comprised of:
- all 5 core competencies
- at least 5 competencies from the production and/or support lists below
- other competencies relevant to the learner’s workplace. These may be production or support competencies from this Training Package, and up to 3 competencies from another endorsed Training Package
The production competencies chosen for this certificate cannot be counted towards the achievement of a second qualification at this certificate level under this Training Package. A different set of production competencies must be chosen for this purpose.
If you already hold a certificate I under this Training Package, you require an additional 7 competencies to qualify for a certificate II. The selection of competencies must comply with the above rules.
NOTES
- Competencies shown in italics in the tables below are also part of Certificate I.
- Competencies marked * have prerequisites. See individual unit for details.
- The customisation rules may also need to be consulted.
Core competencies
| ANTA Code |
Unit Title |
| PMB HAN 103 B |
Shift materials safely by hand |
| PMB OHS 101 B |
Follow OH&S policies and procedures |
| PMB QUAL 101 A |
Apply quality processes |
| PMB WKOPS 101 B |
Apply work procedures and practices |
| PMB COMM 102 B |
Complete workplace documents |
Production competencies
| ANTA Code |
Unit Title |
| PMB FIN 201 B |
Finish products and components |
| PMB FIN 202 B |
Fit attachments to products |
| PMB FIN 203 B |
Repair product imperfections |
| PMB FIN 205 B |
Hand decorate products |
| PMB MAINT 202 B |
Undertake basic maintenance |
| PMB PREP 201 A |
Prepare moulds for composites production |
| PMB PREP 205 B |
Assemble materials and equipment for production |
| PMB PREP 206 B |
Prepare materials to formulae |
| PMB PROD 200 A |
Operate equipment |
| PMB PROD 206 A |
Operate ancillary equipment |
| PMB PROD 207 A |
Operate calender |
| PMB PROD 209 B |
Operate cable winding equipment |
| PMB PROD 210 A |
Operate injection moulding equipment |
| PMB PROD 211 A |
Operate blow moulding equipment |
| PMB PROD 212 A |
Operate thermoforming equipment |
| PMB PROD 213 A |
Operate extruders |
| PMB PROD 216 A |
Operate blown film equipment |
| PMB PROD 217 A |
Operate printing equipment |
| PMB PROD 221 A |
Operate rotational moulding equipment |
| PMB PROD 229 A |
Operate polystyrene shape moulding equipment |
| PMB PROD 230 B |
Monitor process operations |
| PMB PROD 233 A |
Operate film conversion equipment |
| PMB PROD 235 B |
Use materials and process knowledge to complete work operations |
| PMB PROD 236 B |
Operate hand held air/power equipment for production processes |
| PMB PROD 237 B |
Splice cables |
| PMB PROD 240 B |
Cut materials |
| PMB PROD 241 A |
Lay up rubber lining |
| PMB PROD 245 B |
Fabricate materials |
| PMB PROD 246 B |
Hand mix materials |
| PMB PROD 247 B |
Hand lay up composites |
| PMB PROD 248 B |
Prepare surfaces for coating |
| PMB PROD 249 A |
Apply liquid surface coatings |
| PMB PROD 251 A |
Apply gel coat or other polymer surface finish |
| PMB PROD 252 B |
Operate compounding equipment |
| PMB PROD 253 B |
Operate an internal mill blender |
| PMB PROD 254 B |
Operate an open mill blender |
| PMB PROD 255 B |
Operate mixing equipment |
| PMB PROD 259 B |
Operate granulating equipment |
| PMB PROD 261 A |
Operate continuous vulcanising equipment |
| PMB PROD 262 A |
Operate tyre curing equipment |
| PMB PROD 263 A |
Operate retread curing equipment |
| PMB PROD 264 B |
Check recycle wash process |
| PMB PROD 265 A |
Operate portable vulcanising equipment |
| PMB PROD 266 A |
Prepare tyre casings for retreading |
| PMB PROD 267 A |
Operate steel cutting equipment |
| PMB PROD 268 A |
Operate bead coiling equipment |
| PMB PROD 270 A |
Operate injection blow moulding equipment |
| PMB PROD 280 A |
Operate resin-glass depositor |
| PMB PROD 281 A |
Finish composite products |
| PMB PROD 282 A |
Assemble mould |
| PMB PROD 283 A |
Demould product |
| PMB PROD 284 A |
Operate open flame moulding equipment |
| PMB PROD 287 A |
Weld plastic materials |
| PMB PROD 290 A |
Operate filament winding equipment |
| PMB PROD 291 A |
Operate resin infusion equipment |
| PMB PROD 292 A |
Operate pultrusion equipment |
| PMB PROD 293 A |
Operate vacuum bagging equipment |
| PMB PROD 294 A |
Operate resin transfer moulding equipment |
| PMB PROD 295 A |
Operate composite sheeting equipment |
| PMB PROD 296 A |
Operate centrifugal casting equipment |
| PMB PROD 297 A |
Operate equipment using moulding compounds |
| PMB PROD 298 A |
Operate equipment using pre-preg material |
Support competencies
| ANTA Code |
Unit Title |
|
| OH&S |
| PMB MAINT 101 B |
Conduct housekeeping activities |
|
| PMB OHS 204 B |
Apply emergency/incident procedures |
|
| PMB OHS 207 B |
Implement & monitor OH&S policies and procedures |
|
| PMA PER 200 A |
Work in accordance with an issued permit |
|
| PMC SUP 272 A |
Identify and act upon hazards in the workplace |
|
| Interpersonal |
| LMT PR GN 15 A |
Coordinate work of team/section |
|
| PMB TRAIN 201 A |
Assist in the provision of on the job training |
|
| PMB WKOPS 106 B |
Work with others in a team |
|
| Quality |
| PMB CALC 101 A |
Make measurements |
|
| PMB COMP 201 B |
Use computers in the workplace |
|
| PMB QUAL 290 A |
Monitor and maintain product quality |
|
| PMB QUAL 291 A |
Participate in continuous improvement |
|
| PMC SUP 292 A |
Sample and test materials and product |
|
| Environmental |
| PMA ENV 100 A |
Identify and minimise environmental hazards |
|
| PMA ENV 200 A |
Respond to environmental hazards |
* |
| PMB WASTE 101 B |
Collect waste for recycling or safe disposal |
|
| Handle goods |
| PMB HAN 201 B |
Process orders and despatch products |
|
| PMB HAN 202 B |
Load and unload goods |
|
| PMB HAN 204 B |
Package goods/materials |
|
| PMB HAN 205 B |
Transfer loads with slings |
|
| PMB HAN 208 B |
Store products |
|
| PMB ORG 205 B |
Receive goods |
|
| TDT1097A |
Operate a forklift |
|
Certificate III in Plastics PMB 3 01 01
To be awarded a Certificate III in Plastics, competency must be achieved in a total of 21 units of competency comprised of:
- all 5 core competencies
- at least 4 production competencies from the ‘300’ series, (this may include up to 2 from the ‘400’ series), many of which will have prerequisites
- other competencies relevant to the learner’s workplace. These may be production or support competencies from this Training Package, and up to 6 competencies from another endorsed Training Package.
The production competencies chosen for this certificate cannot be counted towards the achievement of a second qualification at this certificate level under this Training Package. A different set of production competencies must be chosen for this purpose.
If you already hold a certificate II under this Training Package, you require an additional 7 competencies to qualify for a certificate III. The selection of competencies must comply with the above rules, including prerequisites requirements.
NOTES
- Competencies shown in italics in the tables below are also part of Certificate II.
- Competencies marked * have prerequisites. See individual unit for details.
- Requirements for a streamed Certificate III are listed separately.
- The customisation rules may also need to be consulted.
Core competencies
| ANTA Code |
Unit Title |
|
| PMB COMM 102 B |
Complete workplace documents |
|
| PMB HAN 103 B |
Shift materials safely by hand |
|
| PMB OHS 101 B |
Follow OH&S policies and procedures |
|
| PMB QUAL 101 A |
Apply quality processes |
|
| PMB WKOPS 101 B |
Apply work procedures and practices |
|
Production competencies
| ANTA Code |
Unit Title |
|
| PMB MAINT 303 B |
Identify equipment faults |
|
| PMB PREP 301 B |
Set up and prepare for production |
|
| PMB PREP 303 B |
Set up equipment for continuous operations |
|
| PMB PREP 304 B |
Change equipment dies |
|
| PMB PREP 305 A |
Change extrusion die and calibration setup |
* |
| PMB PROD 300 A |
Produce products |
|
| PMB PROD 304 B |
Wind products onto drums |
|
| PMB PROD 306 A |
Prepare and start equipment for production |
|
| PMB PROD 307B |
Produce calendered products |
|
| PMB PROD 308 A |
Take machine out of production |
|
| PMB PROD 309 B |
Produce electroplated products |
|
| PMB PROD 310 B |
Produce injection moulded products |
* |
| PMB PROD 311 B |
Produce blow moulded products |
* |
| PMB PROD 312 B |
Produce continuous thermoforming products |
* |
| PMB PROD 313 B |
Produce extruded products |
* |
| PMB PROD 314 B |
Produce compression moulded products |
|
| PMB PROD 315 B |
Produce polyurethane foam |
|
| PMB PROD 316 B |
Produce blown film |
* |
| PMB PROD 317 B |
Print and decorate rigid products |
* |
| PMB PROD 319 B |
Build up rollers |
|
| PMB PROD 320 B |
Produce foam injected mouldings |
|
| PMB PROD 321 A |
Produce rotational moulded products |
* |
| PMB PROD 323 B |
Produce powder coated products |
|
| PMB PROD 328 B |
Produce sheet feed vacuum forming products |
|
| PMB PROD 329 B |
Produce polystyrene shape moulded products |
* |
| PMB PROD 331 B |
Produce printed and decorated film |
|
| PMB PROD 332 B |
Produce thermally bent products |
|
| PMB PROD 333 A |
Convert plastic film |
* |
| PMB PROD 343 B |
Shut down plant or plant area |
|
| PMB PROD 347 A |
Produce composites using hand lamination |
* |
| PMB PROD 349 A |
Produce liquid surface coated products |
* |
| PMB PROD 353 A |
Compound materials using an internal mill blender |
* |
| PMB PROD 354 A |
Compound materials using an open mill blender |
* |
| PMB PROD 355 A |
Make pattern/plug for composites moulds |
* |
| PMB PROD 356 B |
Construct composite moulds |
* |
| PMB PROD 357 B |
Construct jigs and fixtures |
|
| PMB PROD 358 B |
Develop patterns |
* |
| PMB PROD 360 A |
Produce centrifugally cast polyurethane products |
* |
| PMB PROD 362 A |
Produce gravity cast polyurethane products |
* |
| PMB PROD 370 A |
Produce injection blow moulded products |
* |
| PMB PROD 380 A |
Produce composites using chopper gun/despositor |
|
| PMB PROD 387 A |
Produce welded products |
|
| PMB PROD 390 A |
Produce composites using filament winding |
* |
| PMB PROD 391 A |
Produce composites using resin infusion |
* |
| PMB PROD 392 A |
Produce composites using pultrusion |
* |
| PMB PROD 393 A |
Produce composites using vacuum bagging |
* |
| PMB PROD 394 A |
Produce composites using resin transfer moulding |
* |
| PMB PROD 395 A |
Produce composites sheet products |
* |
| PMB PROD 396 A |
Produce composites using centrifugal casting |
* |
| PMB PROD 397 A |
Produce composites using moulding compounds |
* |
| PMB PROD 398 A |
Produce composites using pre-pregs |
* |
| PMB TECH 301 A |
Use material and process knowledge to solve problems |
* |
Support competencies
| ANTA Code |
Unit Title |
|
| OH&S |
| PMB MAINT 101 B |
Conduct housekeeping activities |
|
| PMB OHS 204 B |
Apply emergency/incident procedures |
|
| PMB OHS 207 B |
Implement & monitor OH&S policies and procedures |
|
| PMA PER 200 A |
Work in accordance with an issued permit |
|
| PMA PER 300 A |
Issue work permits |
|
| PMA PER 301 A |
Monitor and control permits |
|
| PMC SUP 272 A |
Identify and act upon hazards in the workplace |
|
| Interpersonal |
| LMT PR GN 15 A |
Coordinate work of team/section |
|
| PMA COM 300 A |
Contribute to the development of plant documentation |
|
| PMB SUP 383 A |
Facilitate a team |
|
| PMB TRAIN 201 A |
Assist in the provision of on the job training |
|
| PMB WKOPS 106 B |
Work with others in a team |
|
| PMB WKOPS 303 B |
Induct new team members |
|
| PMB WKOPS 304 B |
Interpret job specifications |
|
| PMB WKOPS 305 B |
Perform shift handover |
|
| PMB WKOPS 309 A |
Maintain and organise workplace records |
|
| Quality/Technical |
| MEM 9.1A A |
Draw and interpret a sketch |
|
| MEM 9.2A A |
Interpret technical drawing |
|
| MEM 15.1A A |
Performs basic statistical quality control |
|
| PMB CALC 101 A |
Make measurements |
|
| PMB CALC 303 B |
Use precision measuring equipment |
|
| PMB COMP 201 B |
Use computers in the workplace |
|
| PMB QUAL 290 A |
Monitor and maintain product quality |
|
| PMB QUAL 291 A |
Participate in continuous improvement |
|
| PMB QUAL 390 A |
Solve problems using quality tools |
|
| PMB SUP 301 A |
Apply HACCP to the workplace |
|
| PMC SUP 292 A |
Sample and test materials and product |
|
| PML TEST 300 A |
Perform basic tests |
|
| Environmental |
| PMA ENV 100 A |
Identify and minimise environmental hazards |
|
| PMA ENV 200 A |
Respond to environmental hazards |
* |
| PMB WASTE 101 B |
Collect waste for recycling or safe disposal |
|
| PMB WASTE 302 B |
Coordinate waste disposal |
|
| Handle goods |
| PMB HAN 201 B |
Process orders and despatch products |
|
| PMB HAN 202 B |
Load and unload goods |
|
| PMB HAN 204 B |
Package goods/materials |
|
| PMB HAN 205 B |
Transfer loads with slings |
|
| PMB HAN 208 B |
Store products |
|
| PMB ORG 205 B |
Receive goods |
|
| TDT1097A |
Operate a forklift |
|
| Training and assessment |
BSZ401A
BSZ402A
BSZ403A |
Plan assessment †
Conduct assessment
Review assessment |
|
| BSZ404A |
Train small groups |
|
It may also be appropriate to include ‘production’ competencies from the ‘200 series”.
† Note that all three of these units are required to obtain the relevant Statement of Attainment under BSZ98, and to be credited with one unit of competency towards a qualification in PMB01.
Certificate III in Rubber PMB 3 02 01
To be awarded a Certificate III in Rubber, competency must be achieved in a total of 21 units of competency comprised of:
- all 5 core competencies
- at least 4 production competencies from the ‘300’ series, (this may include up to 2 from the ‘400’ series), many of which will have prerequisites
- other competencies relevant to the learner’s workplace. These may be production or support competencies from this Training Package, and up to 6 competencies from another endorsed Training Package.
The production competencies chosen for this certificate cannot be counted towards the achievement of a second qualification at this certificate level under this Training Package. A different set of production competencies must be chosen for this purpose.
If you already hold a certificate II under this Training Package, you require an additional 7 competencies to qualify for a certificate III. The selection of competencies must comply with the above rules, including prerequisites requirements.
NOTES
- Competencies shown in italics in the tables below are also part of Certificate II.
- Competencies marked * have prerequisites. See individual unit for details.
- Requirements for a streamed Certificate III are listed separately
- The customisation rules may also need to be consulted.
Core competencies
| ANTA Code |
Unit Title |
|
| PMB COMM 102 B |
Complete workplace documents |
|
| PMB HAN 103 B |
Shift materials safely by hand |
|
| PMB OHS 101 B |
Follow OH&S policies and procedures |
|
| PMB QUAL 101 A |
Apply quality processes |
|
| PMB WKOPS 101 B |
Apply work procedures and practices |
|
Production competencies
| ANTA Code |
Unit Title |
|
| PMB MAINT 303 B |
Identify equipment faults |
|
| PMB PREP 301 B |
Set up and prepare for production |
|
| PMB PREP 303 B |
Set up equipment for continuous operations |
|
| PMB PREP 304 B |
Change equipment dies |
|
| PMB PREP 305 A |
Change extrusion die and calibration setup |
|
| PMB PROD 300 A |
Produce products |
* |
| PMB PROD 304 B |
Wind products onto drums |
|
| PMB PROD 306 A |
Prepare and start equipment for production |
* |
| PMB PROD 307 B |
Produce calendered products |
|
| PMB PROD 308 A |
Take machine out of production |
|
| PMB PROD 309 B |
Produce electroplated products |
|
| PMB PROD 310 B |
Produce injection moulded products |
* |
| PMB PROD 313 B |
Produce extruded products |
* |
| PMB PROD 314 B |
Produce compression moulded products |
|
| PMB PROD 315 B |
Produce polyurethane foam |
|
| PMB PROD 317 B |
Print and decorate rigid products |
* |
| PMB PROD 318 B |
Build first stage tyres |
|
| PMB PROD 319 B |
Build up rollers |
|
| PMB PROD 320 B |
Produce foam injected mouldings |
|
| PMB PROD 323 B |
Produce powder coated products |
|
| PMB PROD 324 B |
Inspect tyres for retreading |
|
| PMB PROD 325 B |
Lay on tyre retreads |
|
| PMB PROD 326 A |
Inspect tyres |
|
| PMB PROD 327 A |
Produce finished tyres |
|
| PMB PROD 329 B |
Produce polystyrene shape moulded products |
* |
| PMB PROD 331 B |
Produce printed and decorated film |
|
| PMB PROD 335 B |
Build second stage tyres |
|
| PMB PROD 343 B |
Shut down plant or plant area |
|
| PMB PROD 349 A |
Produce liquid surface coated products |
* |
| PMB PROD 353 A |
Compound materials using an internal mill blender |
* |
| PMB PROD 354 A |
Compound materials using an open mill blender |
* |
| PMB PROD 356 B |
Construct composite moulds |
* |
| PMB PROD 357 B |
Construct jigs and fixtures |
|
| PMB PROD 358 B |
Develop patterns |
* |
| PMB PROD 360 A |
Produce centrifugally cast polyurethane products |
* |
| PMB PROD 362 A |
Produce gravity cast polyurethane products |
* |
| PMB PROD 363 A |
Splice conveyor belts on-site |
* |
| PMB PROD 367 A |
Remove and replace belts |
|
| PMB PROD 368 A |
Repair conveyor belt carcass |
* |
| PMB PROD 369 A |
Repair conveyor belt covers |
* |
| PMB PROD 374 A |
Splice new and used belts off site |
* |
| PMB PROD 375 A |
Vulcanise products using an autoclave |
|
| PMB PROD 387 A |
Produce welded products |
|
| PMB TECH 301 A |
Use material and process knowledge to solve problems |
* |
Support competencies
| ANTA Code |
Unit Title |
|
| OH&S |
| PMB MAINT 101 B |
Conduct housekeeping activities |
|
| PMB OHS 204 B |
Apply emergency/incident procedures |
|
| PMB OHS 207 B |
Implement & monitor OH&S policies and procedures |
|
| PMA PER 200 A |
Work in accordance with an issued permit |
|
| PMA PER 300 A |
Issue work permits |
|
| PMA PER 301 A |
Monitor and control permits |
|
| PMC SUP 272 A |
Identify and act upon hazards in the workplace |
|
| Interpersonal |
| LMT PR GN 15 A |
Coordinate work of team/section |
|
| PMA COM 300 A |
Contribute to the development of plant documentation |
|
| PMB SUP 383 A |
Facilitate a team |
|
| PMB TRAIN 201 A |
Assist in the provision of on the job training |
|
| PMB WKOPS 106 B |
Work with others in a team |
|
| PMB WKOPS 303 B |
Induct new team members |
|
| PMB WKOPS 304 B |
Interpret job specifications |
|
| PMB WKOPS 305 B |
Perform shift handover |
|
| PMB WKOPS 309 A |
Maintain and organise workplace records |
|
| Quality/Technical |
| MEM 9.1A A |
Draw and interpret a sketch |
|
| MEM 9.2A A |
Interpret technical drawing |
|
| MEM 15.1A A |
Performs basic statistical quality control |
|
| PMB CALC 101 A |
Make measurements |
|
| PMB CALC 303 B |
Use precision measuring equipment |
|
| PMB COMP 201 B |
Use computers in the workplace |
|
| PMB QUAL 290 A |
Monitor and maintain product quality |
|
| PMB QUAL 291 A |
Participate in continuous improvement |
|
| PMB QUAL 390 A |
Solve problems using quality tools |
|
| PMB SUP 301 A |
Apply HACCP to the workplace |
|
| PMC SUP 292 A |
Sample and test materials and product |
|
| PML TEST 300 A |
Perform basic tests |
|
| Environmental |
| PMA ENV 100 A |
Identify and minimise environmental hazards |
|
| PMA ENV 200 A |
Respond to environmental hazards |
* |
| PMB WASTE 101 B |
Collect waste for recycling or safe disposal |
|
| PMB WASTE 302 B |
Coordinate waste disposal |
|
| Handle goods |
| PMB HAN 201 B |
Process orders and despatch products |
|
| PMB HAN 202 B |
Load and unload goods |
|
| PMB HAN 204 B |
Package goods/materials |
|
| PMB HAN 205 B |
Transfer loads with slings |
|
| PMB HAN 208 B |
Store products |
|
| PMB ORG 205 B |
Receive goods |
|
| TDT1097A |
Operate a forklift |
|
| Training and assessment |
BSZ401A
BSZ402A
BSZ403A |
Plan assessment †
Conduct assessment
Review assessment |
|
| BSZ404A |
Train small groups |
|
It may also be appropriate to include ‘production’ competencies from the ‘200 series’.
† Note that all three of these units are required to obtain the relevant statement of attainment under BSZ98, and to be credited with one unit of competency towards a qualification in PMB01.
Certificate III in Cablemaking PMB 3 03 01
To be awarded a Certificate III in Cablemaking, competency must be achieved in a total of 21 units of competency comprised of:
- all 5 core competencies
- at least 4 production competencies from the ‘300’ series, (this may include up to 2 from the ‘400’ series), many of which will have prerequisites, at least one of which will be:
| PMB PROD 301 B |
Draw wire |
| PMB PROD 302 B |
Bunch and strand wire |
| PMB PROD 303 B |
Lay-up and tape cables |
| PMB PROD 304 B |
Wind wire |
| PMB PROD 305 B |
Colour optical fibre |
| PMB PROD 313 B |
Produce extruded products |
| PMB PROD 372 A |
Produce fibre optic preforms |
| PMB PROD 373 A |
Draw optical fibre |
- other competencies relevant to the learner’s workplace. These may be production or support competencies from this Training Package, and up to 6 competencies from another endorsed Training Package.
The production competencies chosen for this certificate cannot be counted towards the achievement of a second qualification at this certificate level under this Training Package. A different set of production competencies must be chosen for this purpose.
If you already hold a Certificate II in Cablemaking under this Training Package, you require an additional 7 competencies to qualify for a certificate III. The selection of competencies must comply with the above rules, including prerequisites requirements.
NOTES
- Competencies shown in italics in the tables below are also part of Certificate II.
- Competencies marked * have prerequisites. See individual unit for details.
- The customisation rules may also need to be consulted.
Core competencies
| ANTA Code |
Unit Title |
|
| PMB COMM 102 B |
Complete workplace documents |
|
| PMB HAN 103 B |
Shift materials safely by hand |
|
| PMB OHS 101 B |
Follow OH&S policies and procedures |
|
| PMB QUAL 101 A |
Apply quality processes |
|
| PMB WKOPS 101 B |
Apply work procedures and practices |
|
Production competencies
| ANTA Code |
Unit Title |
|
| PMB MAINT 303 B |
Identify equipment faults |
|
| PMB PREP 301 B |
Set up and prepare for production |
|
| PMB PREP 303 B |
Set up equipment for continuous operations |
|
| PMB PREP 304 B |
Change equipment dies |
|
| PMB PREP 305 A |
Change extrusion die and calibration setup |
* |
| PMB PROD 300 A |
Produce products |
|
| PMB PROD 301 B |
Draw wire |
|
| PMB PROD 302 B |
Bunch and strand wire |
|
| PMB PROD 303 B |
Lay up and tape cables |
|
| PMB PROD 304 B |
Wind products onto drums |
|
| PMB PROD 305 B |
Colour optical fibre |
|
| PMB PROD 306 A |
Prepare and start equipment for production |
* |
| PMB PROD 307 B |
Produce calendered products |
|
| PMB PROD 308 A |
Take machine out of production |
|
| PMB PROD 309 B |
Produce electroplated products |
|
| PMB PROD 310 B |
Produce injection moulded products |
* |
| PMB PROD 313 B |
Produce extruded products |
* |
| PMB PROD 314 B |
Produce compression moulded products |
|
| PMB PROD 315 B |
Produce polyurethane foam |
|
| PMB PROD 317 B |
Print and decorate rigid products |
* |
| PMB PROD 331 B |
Produce printed and decorated film |
|
| PMB PROD 343 B |
Shut down plant or plant area |
|
| PMB PROD 349 A |
Produce liquid surface coated products |
* |
| PMB PROD 353 A |
Compound materials using an internal mill blender |
* |
| PMB PROD 354 A |
Compound materials using an open mill blender |
* |
| PMB PROD 357 B |
Construct jigs and fixtures |
|
| PMB PROD 372 A |
Produce fibre optic preforms |
|
| PMB PROD 373 A |
Draw optical fibre |
|
| PMB PROD 375 A |
Vulcanised products using an autoclave |
|
| PMB PROD 387 A |
Produce welded products |
|
| PMB TECH 301 A |
Use material and process knowledge to solve problems |
* |
Support competencies
| ANTA Code |
Unit Title |
|
| OH&S |
| PMB MAINT 101 B |
Conduct housekeeping activities |
|
| PMB OHS 204 B |
Apply emergency/incident procedures |
|
| PMB OHS 207 B |
Implement & monitor OH&S policies and procedures |
|
| PMA PER 200 A |
Work in accordance with an issued permit |
|
| PMA PER 300 A |
Issue work permits |
|
| PMA PER 301 A |
Monitor and control permits |
|
| PMC SUP 272 A |
Identify and act upon hazards in the workplace |
|
| Interpersonal |
| LMT PR GN 15 A |
Coordinate work of team/section |
|
| PMA COM 300 A |
Contribute to the development of plant documentation |
|
| PMB SUP 383 A |
Facilitate a team |
|
| PMB TRAIN 201 A |
Assist in the provision of on the job training |
|
| PMB WKOPS 106 B |
Work with others in a team |
|
| PMB WKOPS 303 B |
Induct new team members |
|
| PMB WKOPS 304 B |
Interpret job specifications |
|
| PMB WKOPS 305 B |
Perform shift handover |
|
| PMB WKOPS 309 A |
Maintain and organise workplace records |
|
| Quality/Technical |
| MEM 9.1A A |
Draw and interpret a sketch |
|
| MEM 9.2A A |
Interpret technical drawing |
|
| MEM 15.1A A |
Performs basic statistical quality control |
|
| PMB CALC 101 A |
Make measurements |
|
| PMB CALC 303 B |
Use precision measuring equipment |
|
| PMB COMP 201 B |
Use computers in the workplace |
|
| PMB QUAL 290 A |
Monitor and maintain product quality |
|
| PMB QUAL 291 A |
Participate in continuous improvement |
|
| PMB QUAL 390 A |
Solve problems using quality tools |
|
| PMB SUP 301 A |
Apply HACCP to the workplace |
|
| PMC SUP 292 A |
Sample and test materials and product |
|
| PML TEST 300 A |
Perform basic tests |
|
| Environmental |
| PMA ENV 100 A |
Identify and minimise environmental hazards |
|
| PMA ENV 200 A |
Respond to environmental hazards |
* |
| PMB WASTE 101 B |
Collect waste for recycling or safe disposal |
|
| PMB WASTE 302 B |
Coordinate waste disposal |
|
| Handle goods |
| PMB HAN 201 B |
Process orders and despatch products |
|
| PMB HAN 202 B |
Load and unload goods |
|
| PMB HAN 204 B |
Package goods/materials |
|
| PMB HAN 205 B |
Transfer loads with slings |
|
| PMB HAN 208 B |
Store products |
|
| PMB ORG 205 B |
Receive goods |
|
| TDT1097A |
Operate a forklift |
|
| Training and assessment |
BSZ401A
BSZ402A
BSZ403A |
Plan assessment †
Conduct assessment
Review assessment |
|
| BSZ404A |
Train small groups |
|
It may also be appropriate to include ‘production’ competencies from the ‘200 series’.
† Note that all three of these units are required to obtain the relevant statement of attainment under BSZ98, and to be credited with one unit of competency towards a qualification in PMB01.
Certificate III in Process Manufacturing PMB 3 04 01
The Process Manufacturing Certificate III is for:
- production support workers (people working in the industry and filling the vital production support roles, but who may not have the opportunity to develop competence in the units of competency related directly to producing products)
- those employees who operate across more than one category within the plastics, rubber and cablemaking industry or divide their time between ‘specialised processes’ and working elsewhere where required.
To be awarded a Certificate III in Process Manufacturing, competency must be achieved in a total of 21 units of competency comprised of:
- all 5 core competencies
- at least 8 competencies from the production and/or support lists below
- other competencies relevant to the learner’s workplace. These may be production or support competencies from this Training Package, and up to 6 competencies from another endorsed Training Package.
The production competencies chosen for this certificate cannot be counted towards the achievement of a second qualification at this certificate level under this Training Package. A different set of production competencies must be chosen for this purpose.
If you already hold a Certificate II in Process Manufacturing under this Training Package, you require an additional 7 competencies to qualify for a certificate III. The selection of competencies must comply with the above rules, including prerequisites requirements.
NOTES
- Competencies shown in italics in the tables below are also part of Certificate II.
- Competencies marked * have prerequisites. See individual unit for details.
- The customisation rules may also need to be consulted.
Core competencies
| ANTA Code |
Unit Title |
|
| PMB COMM 102 B |
Complete workplace documents |
|
| PMB HAN 103 B |
Shift materials safely by hand |
|
| PMB OHS 101 B |
Follow OH&S policies and procedures |
|
| PMB QUAL 101 A |
Apply quality processes |
|
| PMB WKOPS 101 B |
Apply work procedures and practices |
|
Production competencies
| ANTA Code |
Unit Title |
|
| PMB MAINT 303 B |
Identify equipment faults |
|
| PMB PREP 301 B |
Set up and prepare for production |
|
| PMB PREP 303 B |
Set up equipment for continuous operations |
|
| PMB PREP 304 B |
Change equipment dies |
|
| PMB PREP 305 A |
Change extrusion die and calibration setup |
|
| PMB PROD 300 A |
Produce products |
* |
| PMB PROD 301 B |
Draw wire |
|
| PMB PROD 302 B |
Bunch and strand wire |
|
| PMB PROD 303 B |
Lay up and tape cables |
|
| PMB PROD 304 B |
Wind products onto drums |
|
| PMB PROD 305 B |
Colour optical fibre |
|
| PMB PROD 306 A |
Prepare and start equipment for production |
* |
| PMB PROD 307B |
Produce calendered products |
|
| PMB PROD 308 A |
Take machine out of production |
|
| PMB PROD 309 B |
Produce electroplated products |
|
| PMB PROD 310 B |
Produce injection moulded products |
* |
| PMB PROD 311 B |
Produce blow moulded products |
* |
| PMB PROD 312 B |
Produce continuous thermoforming products |
* |
| PMB PROD 313 B |
Produce extruded products |
* |
| PMB PROD 314 B |
Produce compression moulded products |
|
| PMB PROD 315 B |
Produce polyurethane foam |
|
| PMB PROD 316 B |
Produce blown film |
* |
| PMB PROD 317 B |
Print and decorate rigid products |
* |
| PMB PROD 318 B |
Build first stage tyres |
|
| PMB PROD 319 B |
Build up rollers |
|
| PMB PROD 320 B |
Produce foam injected mouldings |
|
| PMB PROD 321 A |
Produce rotational moulded products |
* |
| PMB PROD 323 B |
Produce powder coated products |
|
| PMB PROD 324 B |
Inspect tyres for retreading |
|
| PMB PROD 325 B |
Lay on tyre retreads |
|
| PMB PROD 326 A |
Inspect tyres |
|
| PMB PROD 327 A |
Produce finished tyres |
|
| PMB PROD 328 B |
Produce sheet feed vacuum forming products |
|
| PMB PROD 329 B |
Produce polystyrene shape moulded products |
* |
| PMB PROD 331 B |
Produce printed and decorated film |
|
| PMB PROD 332 B |
Produce thermally bent products |
|
| PMB PROD 333 A |
Convert plastic film |
* |
| PMB PROD 335 B |
Build second stage tyres |
|
| PMB PROD 343 B |
Shut down plant or plant area |
|
| PMB PROD 347 A |
Produce composites using hand lamination |
* |
| PMB PROD 349 A |
Produce liquid surface coated products |
* |
| PMB PROD 353 A |
Compound materials using an internal mill blender |
* |
| PMB PROD 354 A |
Compound materials using an open mill blender |
* |
| PMB PROD 355 A |
Make pattern/plug for composites moulds |
* |
| PMB PROD 356 B |
Construct composite moulds |
* |
| PMB PROD 357 B |
Construct jigs and fixtures |
|
| PMB PROD 358 B |
Develop patterns |
* |
| PMB PROD 360 A |
Produce centrifugally cast polyurethane products |
* |
| PMB PROD 362 A |
Produce gravity cast polyurethane products |
* |
| PMB PROD 363 A |
Splice conveyor belts on-site |
* |
| PMB PROD 367 A |
Remove and replace belts |
|
| PMB PROD 368 A |
Repair conveyor belt carcass |
* |
| PMB PROD 369 A |
Repair conveyor belt covers |
* |
| PMB PROD 370 A |
Produce injection blow moulded products |
* |
| PMB PROD 372 A |
Produce fibre optic preforms |
|
| PMB PROD 373 A |
Draw optical fibre |
|
| PMB PROD 374 A |
Splice new and used belts off site |
* |
| PMB PROD 380 A |
Produce composites using chopper gun/despositor |
|
| PMB PROD 375 A |
Vulcanise products using an autoclave |
|
| PMB PROD 387 A |
Produce welded products |
|
| PMB PROD 390 A |
Produce composites using filament winding |
* |
| PMB PROD 391 A |
Produce composites using resin infusion |
* |
| PMB PROD 392 A |
Produce composites using pultrusion |
* |
| PMB PROD 393 A |
Produce composites using vacuum bagging |
* |
| PMB PROD 394 A |
Produce composites using resin transfer moulding |
* |
| PMB PROD 395 A |
Produce composites sheet products |
* |
| PMB PROD 396 A |
Produce composites using centrifugal casting |
* |
| PMB PROD 397 A |
Produce composites using moulding compounds |
* |
| PMB PROD 398 A |
Produce composites using pre-pregs |
* |
| PMB TECH 301 A |
Use material and process knowledge to solve problems |
|
Support competencies
| ANTA Code |
Unit Title |
|
| OH&S |
| PMB MAINT 101 B |
Conduct housekeeping activities |
|
| PMB OHS 204 B |
Apply emergency/incident procedures |
|
| PMB OHS 207 B |
Implement & monitor OH&S policies and procedures |
|
| PMA PER 200 A |
Work in accordance with an issued permit |
|
| PMA PER 300 A |
Issue work permits |
|
| PMA PER 301 A |
Monitor and control permits |
|
| PMC SUP 272 A |
Identify and act upon hazards in the workplace |
|
| Interpersonal |
| LMT PR GN 15 A |
Coordinate work of team/section |
|
| PMA COM 300 A |
Contribute to the development of plant documentation |
|
| PMB SUP 383 A |
Facilitate a team |
|
| PMB TRAIN 201 A |
Assist in the provision of on the job training |
|
| PMB WKOPS 106 B |
Work with others in a team |
|
| PMB WKOPS 303 B |
Induct new team members |
|
| PMB WKOPS 304 B |
Interpret job specifications |
|
| PMB WKOPS 305 B |
Perform shift handover |
|
| PMB WKOPS 309 A |
Maintain and organise workplace records |
|
| Quality/Technical |
| MEM 9.1A A |
Draw and interpret a sketch |
|
| MEM 9.2A A |
Interpret technical drawing |
|
| MEM 15.1A A |
Performs basic statistical quality control |
|
| PMB CALC 101 A |
Make measurements |
|
| PMB CALC 303 B |
Use precision measuring equipment |
|
| PMB COMP 201 B |
Use computers in the workplace |
|
| PMB QUAL 290 A |
Monitor and maintain product quality |
|
| PMB QUAL 291 A |
Participate in continuous improvement |
|
| PMB QUAL 390 A |
Solve problems using quality tools |
|
| PMB SUP 301 A |
Apply HACCP to the workplace |
|
| PMC SUP 292 A |
Sample and test materials and product |
|
| PML TEST 300 A |
Perform basic tests |
|
| Environmental |
| PMA ENV 100 A |
Identify and minimise environmental hazards |
|
| PMA ENV 200 A |
Respond to environmental hazards |
* |
| PMB WASTE 101 B |
Collect waste for recycling or safe disposal |
|
| PMB WASTE 302 B |
Coordinate waste disposal |
|
| Handle goods |
| PMB HAN 201 B |
Process orders and despatch products |
|
| PMB HAN 202 B |
Load and unload goods |
|
| PMB HAN 204 B |
Package goods/materials |
|
| PMB HAN 205 B |
Transfer loads with slings |
|
| PMB HAN 208 B |
Store products |
|
| PMB ORG 205 B |
Receive goods |
|
| TDT1097A |
Operate a forklift |
|
| Training and assessment |
BSZ401A
BSZ402A
BSZ403A |
Plan assessment †
Conduct assessment
Review assessment |
|
| BSZ404A |
Train small groups |
|
| Pipe welding |
| PMBWELD301A |
Butt weld polyethylene plastic pipelines |
|
| PMBWELD302A |
Electrofusion weld polyethylene pipelines |
|
| PMBWELD303A |
Install polyethylene (non-pressure) drainage pipelines |
|
| PMBWELD304A |
Design polyethylene (non-pressure) drainage pipelines |
* |
| PMBWELD305A |
Install polyethylene plastic pressure pipelines |
|
| PMBWELD306A |
Design polyethylene plastic pressure pipelines |
* |
| PMBWELD307A |
Install high temperature plastic pressure pipelines |
|
| PMBWELD308A |
Install PVC plastic pressure pipelines |
|
| PMBWELD309A |
Weld plastics using extrusion and injection techniques |
|
| PMBWELD310A |
Design PVC plastic pressure pipelines |
* |
| PMBWELD311A |
Design high temperature plastic pressure pipelines |
* |
It may also be appropriate to include ‘production’ competencies from the ‘200 series’.
† Note that all three of these units are required to obtain the relevant statement of attainment under BSZ98, and to be credited with one unit of competency towards a qualification in PMB01.
Certificate IV in Polymer Technology PMB 4 01 01
There is no streamed Certificate IV qualification. This qualification is for polymer technicians. People for whom this qualification is not relevant may be better served by qualifications from other Training Packages (for example, non-technical team leaders, coordinators and supervisors may be better served by a qualification in Frontline Management).
To be awarded a Certificate IV in Polymer technology, competency must be achieved in a total of 28 units of competency comprised of:
- all 5 core competencies
- at least 3 production/technical competencies from the ‘400’ series, (this may include up to 2 from the ‘500’ series)
- other competencies relevant to the learner’s workplace. These may be production or support competencies from this Training Package, and up to 10 competencies from another endorsed Training Package.
If you already hold a certificate III under this Training Package, you require an additional 7 competencies to qualify for a certificate IV. The selection of competencies must comply with the above rules, including prerequisites requirements.
NOTES
- Core and support unit requirements carried forward from Certificate III are shown in italics in the tables below.
- Competencies marked * have prerequisites. See individual unit for details.
- There are no streamed qualifications at Certificate IV.
- The customisation rules may also need to be consulted.
Core competencies
| ANTA Code |
Unit Title |
|
| PMB COMM 102 B |
Complete workplace documents |
|
| PMB HAN 103 B |
Shift materials safely by hand |
|
| PMB OHS 101 B |
Follow OH&S policies and procedures |
|
| PMB QUAL 101 A |
Apply quality processes |
|
| PMB WKOPS 101 B |
Apply work procedures and practices |
|
"Production/technical competencies
| ANTA Code |
Unit Title |
|
| PMB MAINT 404 B |
Coordinate the conduct of maintenance |
|
| PMB MAINT 405 A |
Identify problems in fluid power systems |
|
| PMB MAINT 406 A |
Identify problems in electronic control systems |
|
| PMC OPS 400 A |
Optimise process systems |
|
| PMB ORG 403 B |
Conduct trials on products or processes |
|
| PMB PROD 430 A |
Trial a new die/tool |
|
| PMB PROD 431 A |
Trial a new, advanced or complex mould |
|
| PMB PROD 444 B |
Apply materials and process knowledge to coordinate work operations |
|
| PMB TECH 401 A |
Predict polymer properties and characteristics |
|
| PMB TECH 402 A |
Set up and remove complex dies |
* |
| PMB TECH 403 A |
Test fibre-composites materials and laminates |
|
| PMB TECH 404 A |
Mould chemical-resistant and/or fire retardant fibre-composites |
* |
| PMB TECH 405 A |
Repair damaged fibre-composites structures |
* |
Support competencies
| ANTA Code |
Unit Title |
|
| OH&S |
| PMB MAINT 101 B |
Conduct housekeeping activities |
|
| PMB OHS 204 B |
Apply emergency/incident procedures |
|
| PMB OHS 207 B |
Implement & monitor OH&S policies and procedures |
|
| PMB OHS 409 A |
Establish, maintain & evaluate an OH&S system |
|
| PMA PER 200 A |
Work in accordance with an issued permit |
|
| PMA PER 300 A |
Issue work permits |
|
| PMA PER 301 A |
Monitor and control permits |
|
| PMC SUP 272 A |
Identify and act upon hazards in the workplace |
|
| Interpersonal/Management |
| BSX FMI 401 A |
Manage personal work priorities and professional development |
|
| BSX FMI 402 A |
Provide leadership in the workplace |
|
| BSX FMI 403 A |
Establish and manage effective workplace relationships |
|
| BSX FMI 404 A |
Participate in, lead and facilitate work teams |
|
| BSX FMI 405 A |
Manage operations to achieve planned outcomes |
|
| BSX FMI 406 A |
Manage workplace information |
|
| BSX FMI 407 A |
Manage quality customer service |
|
| BSX FMI 408 A |
Develop and maintain and safe workplace and environment |
|
| BSX FMI 409 A |
Implement and monitor continuous improvement systems and processes |
|
| BSX FMI 410 A |
Facilitate and capitalise on change and innovation |
|
| BSX FMI 411 A |
Contribute to the development of a workplace learning environment |
|
| LMT PR GN 15 A |
Coordinate work of team/section |
|
| PMA COM 300 A |
Contribute to the development of plant documentation |
|
| PMB SUP 383 A |
Facilitate a team |
|
| PMB TRAIN 201 A |
Assist in the provision of on the job training |
|
| PMB WKOPS 106 B |
Work with others in a team |
|
| PMB WKOPS 303 B |
Induct new team members |
|
| PMB WKOPS 304 B |
Interpret job specifications |
|
| PMB WKOPS 305 B |
Perform shift handover |
|
| PMB WKOPS 309 A |
Maintain and organise workplace records |
|
| PMB WKOPS 402 B |
Apply workplace procedures to improve workplace performance |
|
| Quality/Technical |
| MEM 9.1A A |
Draw and interpret a sketch |
|
| MEM 9.2A A |
Interpret technical drawing |
|
| MEM 15.1A A |
Performs basic statistical quality control |
|
| PMB CALC 101 A |
Make measurements |
|
| PMB CALC 303 B |
Use precision measuring equipment |
|
| PMB COMP 201 B |
Use computers in the workplace |
|
| PMB QUAL 290 A |
Monitor and maintain product quality |
|
| PMB QUAL 291 A |
Participate in continuous improvement |
|
| PMB QUAL 390 A |
Solve problems using quality tools |
|
| PMB QUAL 400 A |
Develop and monitor quality systems |
|
| PMB SUP 301 A |
Apply HACCP to the workplace |
|
| PMC SUP 292 A |
Sample and test materials and product |
|
| PML TEST 300 A |
Perform basic tests |
|
| PML TEST 401A |
Perform non-instrumental tests/procedures |
* |
| Environmental |
| PMA ENV 100 A |
Identify and minimise environmental hazards |
|
| PMA ENV 200 A |
Respond to environmental hazards |
* |
| PMB WASTE 101 B |
Collect waste for recycling or safe disposal |
|
| PMB WASTE 302 B |
Coordinate waste disposal |
|
| Handle goods |
| PMB HAN 201 B |
Process orders and despatch products |
|
| PMB HAN 202 B |
Load and unload goods |
|
| PMB HAN 204 B |
Package goods/materials |
|
| PMB HAN 205 B |
Transfer loads with slings |
|
| PMB HAN 208 B |
Store products |
|
| PMB ORG 205 B |
Receive goods |
|
| TDT1097A |
Operate a forklift |
|
| Training and assessment |
BSZ401A
BSZ402A
BSZ403A |
Plan assessment †
Conduct assessment
Review assessment |
|
| BSZ404A |
Train small groups |
|
It may also be appropriate to include ‘production’ competencies from the ‘300’ series.
† Note that all three of these units are required to obtain the relevant statement of attainment under BSZ98, and to be credited with one unit of competency towards a qualification in PMB01.
Packaging for a streamed qualification
This Training Package provides for a number of qualifications streamed by industry sector within the qualifications specified in the previous section. The requirements for a streamed qualification are contained in this section. Streaming is only provided for Certificates II and III. If the streamed qualifications do not totally meet your requirements, then the generic qualification as described in Packaging advice,and possibly the Customising advice of the Training Package Qualifications Framework need to be used.
This section summarises typical production competencies which an operator will choose to obtain a streamed Certificate II and/or III. This list should be taken as indicative only of job requirements and should not preclude the use of any other relevant unit of competency. While most jobs fit neatly within a stream, some will fall across a number of ‘typical streams’ and some will fall outside any ‘typical stream’.
Note that all the requirements listed in Packaging advice, also apply here. This section in no way increases or decreases the number of core competencies, production competencies or the total number of competencies needed for a qualification. It does however restrict the choice of production competencies for a streamed qualification by requiring particular production competencies to be chosen.
The Certificate I, Certificate IV, Diploma and Advanced Diploma are not available as streamed qualifications. See Packaging advice for details.
Certificate II in Plastics (Blow moulding)
Within the requirements for the awarding of a Certificate II in Plastics choose:
| PMB PROD 211 A |
Operate blow moulding equipment |
Certificate III in Plastics (Blow moulding)
Within the requirements for the awarding of a Certificate III in Plastics choose at least one of:
| PMB PROD 311 B |
Produce blow moulded products |
| PMB PROD 370 A |
Produce injection blow moulded products |
Certificate II in Plastics (Calendering)
Within the requirements for the awarding of a Certificate II in Plastics choose:
| PMB PROD 207 A |
Operate calender |
Certificate III in Plastics (Calendering)
Within the requirements for the awarding of a Certificate III in Plastics choose:
| PMB PROD 307 B |
Produce calendered products |
Certificate II in Plastics (Composites)
Within the requirements for the awarding of a Certificate II in Plastics choose all of:
| PMB PROD 251 A |
Apply gel coat or other polymer surface finish |
| PMB PROD 281 A |
Finish composite products |
| PMB PREP 201 A |
Prepare moulds for composites production |
and at least one of
| PMB PROD 247 B |
Hand lay up composites |
| PMB PROD 280 A |
Operate resin-glass depositor equipment |
| PMB PROD 290 A |
Operate filament winding equipment |
| PMB PROD 291 A |
Operate resin infusion moulding equipment |
| PMB PROD 292 |
Operate pultrusion equipment |
| PMB PROD 293 A |
Operate vacuum bagging equipment |
| PMB PROD 294 A |
Operate resin transfer moulding equipment |
| PMB PROD 295 A |
Operate composite sheeting equipment |
| PMB PROD 296 A |
Operate centrifugal casting equipment |
| PMB PROD 297 A |
Operate equipment using moulding compounds |
| PMB PROD 297 |
Operate equipment using pre-preg material |
Certificate III in Plastics (Composites)
Within the requirements for the awarding of a Certificate III in Plastics choose both of:
| PMB FIN 203 B |
Repair product imperfections |
| MEM 9.2A A |
Interpret technical drawing |
and at least two of:
| PMB PROD 355 A |
Make pattern/plug for composites moulds |
| PMB PROD 356 B |
Construct composite moulds |
| PMB PREP 304 |
Change equipment dies |
| PMB MAINT 303 B |
Identify equipment faults |
and at least one of:
| PMB PROD 347 A |
Produce composites using hand lamination |
| PMB PROD 380 A |
Produce composites using chopper gun/depositors |
| PMB PROD 390 A |
Produce composites using filament winding |
| PMB PROD 391 A |
Produce composite using resin infusion |
| PMB PROD 392 A |
Produce composites using pultrusion |
| PMB PROD 393 A |
Produce composites using vacuum bagging |
| PMB PROD 394 A |
Produce composites using resin transfer moulding |
| PMB PROD 395 A |
Produce composite sheet products |
| PMB PROD 396 A |
Produce composites using centrifugal casting |
| PMB PROD 397 A |
Produce composites using moulding compounds |
| PMB PROD 398 A |
Produce composites using pre-pregs |
Certificate II in Plastics (Compounding)
Within the requirements for the awarding of a Certificate II in Plastics choose at least one of:
| PMB PROD 252 B |
Operate compounding equipment |
| PMB PROD 253 B |
Operate an internal mill blender |
| PMB PROD 254 B |
Operate an open mill blender |
| PMB PROD 255 B |
Operate mixing equipment |
Certificate III in Plastics (Compounding)
Within the requirements for the awarding of a Certificate III in Plastics choose at least one of:
| PMB PROD 353 A |
Compound materials using an internal mill blender |
| PMB PROD 354 A |
Compound materials using an open mill blender |
Certificate II in Plastics (Extrusion)
Certificate II in Rubber (Extrusion)
Within the requirements for the awarding of a Certificate II in Plastics or a Certificate II in Rubber choose:
| PMB PROD 213 A |
Operate extruders |
Certificate III in Plastics (Extrusion)
Certificate III in Rubber (Extrusion)
Within the requirements for the awarding of a Certificate III in Plastics or a Certificate III in Rubber choose:
| PMB PROD 313 B |
Produce extruded products |
Certificate II in Plastics (Fabrication)
Certificate II in Rubber (Fabrication)
Within the requirements for the awarding of a Certificate II in Plastics or a Certificate II in Rubber choose at least one of:
| PMB PROD 240 B |
Cut materials |
| PMB PROD 245 B |
Fabricate materials |
| PMB PROD 287 A |
Weld plastic materials |
Certificate III in Plastics (Fabrication)
Certificate III in Rubber (Fabrication)
Within the requirements for the awarding of a Certificate III in Plastics or a Certificate III in Rubber choose at least one of:
| PMB PROD 357 B |
Construct jigs and fixtures |
| PMB PROD 358 B |
Develop patterns |
| PMB PROD 387 A |
Produce welded products |
Certificate II in Plastics (Film)
Within the requirements for the awarding of a Certificate II in Plastics choose at least one of:
| PMB PROD 216 A |
Operate blown film equipment |
| PMB PROD 233 A |
Operate film conversion equipment |
Certificate III in Plastics (Film)
Within the requirements for the awarding of a Certificate III in Plastics choose at least one of:
| PMB PROD 316 B |
Produce blown film |
| PMB PROD 333 A |
Convert plastic film |
Certificate II in Plastics (Injection moulding)
Certificate II in Rubber (Injection moulding)
Within the requirements for the awarding of a Certificate II in Plastics or a Certificate II in Rubber choose:
| PMB PROD 210 A |
Operate injection moulding equipment |
Certificate III in Plastics (Injection moulding)
Certificate III in Rubber (Injection moulding)
Within the requirements for the awarding of a Certificate III in Plastics or a Certificate III in Rubber choose:
| PMB PROD 310 B |
Produce injection moulded products |
Certificate II in Plastics (Polystyrene)
Within the requirements for the awarding of a Certificate II in Plastics choose:
| PMB PROD 229 A |
Operate polystyrene shape moulding equipment |
Certificate III in Plastics (Polystyrene)
Within the requirements for the awarding of a Certificate III in Plastics choose:
| PMB PROD 329 B |
Produce polystyrene shape moulded products |
Certificate II in Plastics (Polyurethane)
Certificate II in Rubber (Polyurethane)
Within the requirements for the awarding of a Certificate II in Plastics or a Certificate II in Rubber choose:
| PMB PROD 246 B |
Hand mix materials |
Certificate III in Plastics (Polyurethane)
Certificate III in Rubber (Polyurethane)
Within the requirements for the awarding of a Certificate III in Plastics or a Certificate III in Rubber choose at least one of:
| PMB PROD 315 B |
Produce polyurethane foam |
| PMB PROD 320 B |
Produce foam injected mouldings |
| PMB PROD 360 A |
Produce centrifugally cast polyurethane products |
| PMB PROD 362 A |
Produce gravity cast polyurethane products |
Certificate II in Plastics (Rotational moulding)
Within the requirements for the awarding of a Certificate II in Plastics choose at least one of:
| PMB PROD 221 A |
Operate rotational moulding equipment |
| PMB PROD 282 A |
Assemble mould |
| PMB PROD 283 A |
Demould product |
| PMB PROD 284 A |
Operate open flame moulding equipment |
Certificate III in Plastics (Rotational moulding)
Within the requirements for the awarding of a Certificate III in Plastics choose:
| PMB PROD 321 A |
Produce rotational moulded products |
Certificate II in Plastics (Thermoforming)
Within the requirements for the awarding of a Certificate II in Plastics choose:
Certificate II in Plastics (Thermoforming)
Within the requirements for the awarding of a Certificate II in Plastics choose:
| PMB PROD 212A |
Operate thermoforming equipment |
Certificate III in Plastics (Thermoforming)
Within the requirements for the awarding of a Certificate III in Plastics choose at least one of:
| PMB PROD 312 B |
Produce continuous thermoforming products |
| PMB PROD 328 B |
Produce sheet feed vacuum forming products |
| PMB PROD 332 B |
Produce thermally bent products |
| PMB PROD 357 B |
Construct jigs and fixtures |
Certificate II in Rubber (Belt splicing)
Within the requirements for the awarding of a Certificate II in Rubber choose:
| PMB PROD 265 A |
Operate portable vulcanising equipment |
Certificate III in Rubber (Belt splicing)
Within the requirements for the awarding of a Certificate III in Rubber choose at least one of:
| PMB PROD 363 A |
Splice conveyor belts on-site |
| PMB PROD 367 A |
Remove and replace belts |
| PMB PROD 368 A |
Repair conveyor belt carcass |
| PMB PROD 369 A |
Repair conveyor belt covers |
| PMB PROD 374 A |
Splice new and used belts off site |
Certificate II in Rubber (Rubber lining)
Within the requirements for the awarding of a Certificate II in Rubber choose at least one of:
| PMB PROD 240 B |
Cut materials |
| PMB PROD 241 A |
Lay up rubber lining |
Certificate III in Rubber (Rubber lining)
Within the requirements for the awarding of a Certificate III in Rubber choose:
| PMB PROD 375 A |
Vulcanise products using an autoclave |
Certificate II in Rubber (Tyre manufacture)
Within the requirements for the awarding of a Certificate II in Rubber choose at least one of:
| PMB PROD 207 A |
Operate calender |
| PMB PROD 213 A |
Operate extruders |
| PMB PROD 253 B |
Operate an internal mill blender |
| PMB PROD 254 B |
Operate an open mill blender |
| PMB PROD 262 A |
Operate tyre curing equipment |
| PMB PROD 267 A |
Operate steel cutting equipment |
| PMB PROD 268 A |
Operate bead coiling equipment |
Certificate III in Rubber (Tyre manufacture)
Within the requirements for the awarding of a Certificate III in Rubber choose at least one of:
| PMB PROD 307B |
Produce calendered products |
| PMB PROD 313 B |
Produce extruded products |
| PMB PROD 318 B |
Build first stage tyres |
| PMB PROD 326 A |
Inspect tyres |
| PMB PROD 335 B |
Build second stage tyres |
| PMB PROD 353 A |
Compound materials using an internal mill blender |
| PMB PROD 354 A |
Compound materials using an open mill blender |
Certificate II in Rubber (Tyre retreading)
Within the requirements for the awarding of a Certificate II in Rubber choose at least one of:
| PMB PROD 262 A |
Operate tyre curing equipment |
| PMB PROD 263 A |
Operate retread curing equipment |
| PMB PROD 266 A |
Prepare tyre casings for retreading |
Certificate III in Rubber (Tyre retreading)
Within the requirements for the awarding of a Certificate III in Rubber choose at least one of:
| PMB PROD 325 B |
Lay on tyre retreads |
| PMB PROD 324 B |
Inspect tyres for retreading |
Certificate II in Plastics (Surface coating)
Certificate II in Rubber (Surface coating)
Within the requirements for the awarding of a Certificate II in Plastics or a Certificate II in Rubber you must also choose at least one of:
| PMB PROD 246 B |
Hand mix materials |
| PMB PROD 248 B |
Prepare surfaces for coating |
| PMB PROD 249 A |
Apply liquid surface coatings |
| PMB PROD 255 B |
Operate mixing equipment |
Certificate III in Plastics (Surface coating)
Certificate III in Rubber (Surface coating)
Within the requirements for the awarding of a Certificate III in Plastics or a Certificate III in Rubber choose at least one of:
| PMB PROD 309 B |
Produce electroplated products |
| PMB PROD 323 B |
Produce powder coated products |
| PMB PROD 349 A |
Produce liquid surface coated products |
Click here to return to Information Bulletin 188
|
About Us 
